Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: VXL V6 on 17 November 2008, 17:07:59

Title: Removing rear seat back side panels
Post by: VXL V6 on 17 November 2008, 17:07:59

Is there a knack to removing the side panels on the outer edges of the rear seat back on a facelift saloon? Haven't had chance to take a close look but thought i'd ask here before I broke anything!

TIA
Andy

Title: Re: Removing rear seat back side panels
Post by: MutantCav on 17 November 2008, 17:22:17

Remove seat base (2 pull things that you erm pull and seat base comes out)...then at the bottom of the seat panels you will see there is a tag that is slotted through the bottom of the panel and bent over...unbend it pull the bottom of the panel through and lift out...

Title: Re: Removing rear seat back side panels
Post by: VXL V6 on 17 November 2008, 17:30:37

Ahhh! Many thanks!

Title: Re: Removing rear seat back side panels
Post by: MutantCav on 17 November 2008, 17:33:08

Then to remove seat backs...13mm nut either side of the centre armrest to undo...and 2 10mm bolts the other end of each back panel, hidden behind the lining of the chassis behind the seats...you pull/flip up to reveal the bolts...should be obvious when you do it :)

Title: Re: Removing rear seat back side panels
Post by: VXL V6 on 17 November 2008, 17:41:48

Just need to get the n/s panel out so I can feed a wiring loom down into the wiring conduit that then runs down the sill.  :y