Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GuzziHero on 18 November 2008, 18:20:48

Title: V6 breather cleaning with engine in situ?
Post by: GuzziHero on 18 November 2008, 18:20:48
Ive looked through the guide on cleaning the breather system and it appears from the pictures (and where some of the pipes are) that I need to remove the engine to get at them all.  I've done the plenum  breather system, but Im stuck now.

Is that correct?  Is there no way to clean them all with the engine in place?

Cheers :)
Title: Re: V6 breather cleaning with engine in situ?
Post by: ngrainqey on 18 November 2008, 18:33:04
yes matey you can clean all the breathers out with the engine in situ...
it's alot easier with the scuttle and/or plenium off!
Title: Re: V6 breather cleaning with engine in situ?
Post by: GuzziHero on 18 November 2008, 18:49:46
Right...I found the guide to do that.  Thanks muchly!
Title: Re: V6 breather cleaning with engine in situ?
Post by: Elite Pete on 18 November 2008, 20:39:55
Send Daz a PM and ask him if there's room this weekend, we can go through it with you ;)

http://www.omegaowners.com/forum/YaBB.pl?num=1226342567
Title: Re: V6 breather cleaning with engine in situ?
Post by: Darth Loo-knee on 18 November 2008, 20:43:38
Yeah no problem come along a few guys gonna be there that can point you in the right direction...
PM me for the address if your intrested :y