Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bighed on 28 November 2008, 09:20:58
-
Doing an oil change on mig sunday hopefully. Have done one already but have got a brain like a sive.
Is there a copper washer on the sump plug? If so what size? :-/
-
If its the torx plug its a rubber o ring
-
Doing an oil change on mig sunday hopefully. Have done one already but have got a brain like a sive.
Is there a copper washer on the sump plug? If so what size? :-/
well... theres supposed to be a copper washer-had an oil leak on mine for ages till i finally changed oil again and put one on...
i have a spare rubber o-ring if it's the hex shaped plug lol...or if i can be arsed i can take the one of my 2.0 lump which is going to be weighed in...eventually and reaneal it for you so it's good to go ;)
-
Just out of intrest, what is the size of the plug? I'm about to buy a spare plug just-in-case and we have some plugs on the shelf at work, just wondering if one of the standard plugs might fit...
-
Just out of intrest, what is the size of the plug? I'm about to buy a spare plug just-in-case and we have some plugs on the shelf at work, just wondering if one of the standard plugs might fit...
unless somebody knows specifically then it's roughly errr...8/10mm diametre on the threads with a 13mm i think it is head on it
-
The parts dept at my local dealers normally put one in with the filter ;)
-
The parts dept at my local dealers normally put one in with the filter ;)
well mine gave me them both for free :P
-
The parts dept at my local dealers normally put one in with the filter ;)
well mine gave me them both for free :P
My dads bigger than your dad, so there :P
-
The parts dept at my local dealers normally put one in with the filter ;)
well mine gave me them both for free :P
My dads bigger than your dad, so there :P
haha!