Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bighed on 26 December 2008, 22:14:43

Title: climate control
Post by: bighed on 26 December 2008, 22:14:43
now i have replaced all the bulbs in my climate control panel, when I turn it off i get two horizontal lines on the temp set dials which wasnt there before.

Any ideas chappies???
 :)
Title: Re: climate control
Post by: hotel21 on 26 December 2008, 22:18:31
Hold off and auto together for a few seconds to reset servos.  
Title: Re: climate control
Post by: markey mark on 26 December 2008, 22:20:43
its seeing a fault have you made all connectors secure ??? :-?
Title: Re: climate control
Post by: bighed on 26 December 2008, 22:20:51
Ah ok then, thanks very much. Is that with it on or off?
Title: Re: climate control
Post by: bighed on 26 December 2008, 22:21:39
It works fine when turned on. The lines come up after i turn it off
Title: Re: climate control
Post by: markey mark on 26 December 2008, 22:22:05
Quote
Ah ok then, thanks very much. Is that with it on or off?

reset with ing on  :y
Title: Re: climate control
Post by: bighed on 26 December 2008, 22:23:21
Ok thanks. Will give that a try
Title: Re: climate control
Post by: feeutfo on 26 December 2008, 23:20:48
the -- symbol means the climate ecu has stored a fault code. Had it my old mig 2 or 3 days "before" it ran out of gas due to holed condenser.
Title: Re: climate control
Post by: TheBoy on 27 December 2008, 10:12:04
The -- means the system has detected a fault.
Title: Re: climate control
Post by: bighed on 28 December 2008, 21:11:50
Quote
The -- means the system has detected a fault.


Er... Ok tried the reset and its still doing it. I have had a general mooch and cant see anything untoward.  

Its funny how it started after replacing bulbs :-?
Title: Re: climate control
Post by: Cumbria on 29 December 2008, 00:13:24
I had the same problem on mine after replacing bulbs. Cleared itself after about 2 weeks.