Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Kate on 31 December 2008, 21:47:38

Title: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: Kate on 31 December 2008, 21:47:38

Happy New Year!

My mig is blowing out cold air! Brrrrrrr

The engine seems to warm up fine- the temp guage reads about 92 but the air in the cabin is barely warm.

Anyone got any ideas?

Thanks very much and I would like to say a big thankyou to everyone that has helped me over the past year especially Broocie, Barry,Mark,Daz,James,TB and all the rest of you great guys!

Thanks, you're the best!

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: JamesV6CDX on 31 December 2008, 21:49:34

Pull the vacc pipe of the HBV kate and see what happens then.

Also feel the heater pipes going into the bulkhead and make sure they are hot.

Also - reset the climate.

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: fife_omega_v6 on 31 December 2008, 21:53:09

Quote

Pull the vacc pipe of the HBV kate and see what happens then.

Also feel the heater pipes going into the bulkhead and make sure they are hot.

Also - reset the climate.

youre better checking the internal pipes goin to the matrix both should be untouchable hot if only is hot and 1 warm u got yourself a blocked matrix--you can find these pipes above the pedals they are aluminum :y

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: Kate on 31 December 2008, 21:54:41

Thank you. Is anyone drunk?

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: JamesV6CDX on 31 December 2008, 21:59:22

Quote

Quote

Pull the vacc pipe of the HBV kate and see what happens then.

Also feel the heater pipes going into the bulkhead and make sure they are hot.

Also - reset the climate.

youre better checking the internal pipes goin to the matrix both should be untouchable hot if only is hot and 1 warm u got yourself a blocked matrix--you can find these pipes above the pedals they are aluminum :y

Check the bulkhead pipes and vacc pipe first - to eliminate a HBV or vacc issue :y

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: Kate on 31 December 2008, 22:00:59

Thanks James.  You are the best!

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: JamesV6CDX on 31 December 2008, 22:01:02

Quote

Thank you. Is anyone drunk?

I had a bottle of bud at the station, while waiting for the train - and three pints of bulmers on the train (first class, free upgrade  8-) ;D )

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: cem_devecioglu on 31 December 2008, 22:02:07

Quote

Thank you. Is anyone drunk?

its 2009 here..trying but still not..happy new year :y

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: ngrainqey on 01 January 2009, 00:16:49

iv had a can of fosters and 1/3 of a bottle of wine.. does that count :P

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: fife_omega_v6 on 01 January 2009, 00:44:12

Quote

Quote

Quote

Pull the vacc pipe of the HBV kate and see what happens then.

Also feel the heater pipes going into the bulkhead and make sure they are hot.

Also - reset the climate.

youre better checking the internal pipes goin to the matrix both should be untouchable hot if only is hot and 1 warm u got yourself a blocked matrix--you can find these pipes above the pedals they are aluminum :y

Check the bulkhead pipes and vacc pipe first - to eliminate a HBV or vacc issue :y

 :-? its the same pipe so why the check bulkhead pipes first.... :-Xbrowny points

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: Ian_D on 01 January 2009, 01:32:35

Happy new year everyone! Hope its a 'gud en!'  :y

Title: Re: Hey Everyone, Happy New Year! Cold Mig Problem!
Post by: Kate on 01 January 2009, 13:59:04

I've got a hangover now.