Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: bighed on 30 December 2008, 17:18:45
-
My mate christian has just bought a MINT 3.0 MV6 saloon on a W plate with 65000 on clock and full vx service history,in champagne colour. Will post some pics when find camera lead. :y
Anyhows its got the built in car phone. With a vodafone sim card. What will he have to do to get thisworking. He said he tried calling his mums house, which rang but when she answered it cut off. Any ideas???
Also his drivers side electric height adjustor dont work but passenger side does. Any ideas on this one too??? :)
-
Is it a facelift? Which Head unit? CCRT700, NCDR2015 with telematics in glove box etc
-
you got to change the sim in the phone,mines takes any sim
-
Is it a facelift? Which Head unit? CCRT700, NCDR2015 with telematics in glove box etc
Its a mini Facelift and is the 700 unit.
-
Try another SIM and also check the roof Aerial has the correct mast fitted.
-
ccrt700 can be problematic. Disconnecting power for a few hours (you will need the code!) can help.
-
I have got code and a usable 02 simcard, ile try above suggestions and see what happens, BTW i absolutally love the car, its so quite and is in mint condition, only problem with it is the Drivers seat height adjuster dont work but it does on the passenger side, surly these would be fused together but they arnt because the other works, any tips guys? :)
-
Pics are now up in Gallery :y
Do think the seats ARE on same fuse mate thinking about it. Have you checked wiring/connectors over??
Sorry TB modified this post before looking as u posted yours :y
-
I have got code and a usable 02 simcard, ile try above suggestions and see what happens, BTW i absolutally love the car, its so quite and is in mint condition, only problem with it is the Drivers seat height adjuster dont work but it does on the passenger side, surly these would be fused together but they arnt because the other works, any tips guys? :)
check for power at seat (don't unplug airbag!!)
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
My car had no cruise control fitted when bought. Found one on EBAY fitted it (took about 5 mins rhen took it to a auxhall specialist to Tech 2 it and no problems since ;).Easy job :y Ok just realised it is the old model so more is involved. Nice motor thou
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
no more stuff needed, 3.0 is cable driven, so needs to actuator and other bits and bobs.
MV6 never came with cruise as standard.
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
My car had no cruise control fitted when bought. Found one on EBAY fitted it (took about 5 mins rhen took it to a auxhall specialist to Tech 2 it and no problems since ;).Easy job :y
Yours is a 2.6 drive-by-wire and throttle / cruise is controlled by ECU, prefacelift will mean its a 3.0, and has a standard cable driven throttle body.
More required ;)
-
The microphone in my interior light had been pushed up into the headlining so if it doesn't work straight off try having a look up there for it!
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
My car had no cruise control fitted when bought. Found one on EBAY fitted it (took about 5 mins rhen took it to a auxhall specialist to Tech 2 it and no problems since ;).Easy job :y
Yours is a 2.6 drive-by-wire and throttle / cruise is controlled by ECU, prefacelift will mean its a 3.0, and has a standard cable driven throttle body.
More required ;)
Thanks just realised :-[
-
Also his MV6 has no cruise control :-?
Would this just be the case of getting stalk fitted or is there more involved???
My car had no cruise control fitted when bought. Found one on EBAY fitted it (took about 5 mins rhen took it to a auxhall specialist to Tech 2 it and no problems since ;).Easy job :y
Yours is a 2.6 drive-by-wire and throttle / cruise is controlled by ECU, prefacelift will mean its a 3.0, and has a standard cable driven throttle body.
More required ;)
Thanks just realised :-[
No problemo its easy to get confused on all the different engine combination.
In Short..
Full cruise kit needed on - 2.0 / 2.5 V6 / 3.0 V6
Just stalk needed on 2.2 / 2.5 TD / 2.6 V6 / 3.2 V6
-
So is it a no for a simple swap of the stalk then? yea my 3.0 has no flyby.
-
Gutted mate as cruise is the dogs on the motorways. Will have to look into how to change it n we will give it a crack! :y
-
Still piss easy to do, just needs more bits:
Actuator
Cable
Brake switch
Clutch swith if manual
Stalk
-
Its an Auto, is there an FAQ on this guys?
-
Gutted mate as cruise is the dogs on the motorways. Will have to look into how to change it n we will give it a crack! :y
Yea too right, when you free for us to have a crack at unblocking drain hole mate?
-
Its an Auto, is there an FAQ on this guys?
Not sure - check maint guides section. But its easy anyway, though some MV6s have extra coolant pumps which need moving slightly
-
Ok will look into this when belt and drain holes are sorted, thanks for the help though, will get looking into this right away!
-
only problem with it is the Drivers seat height adjuster dont work but it does on the passenger side, surly these would be fused together but they arnt because the other works, any tips guys? :)
Mine seems similar (I'm awaiting a seat controller) if I disconnect the seat - large mutliway cable and then reconnect, the seat opeates fine for ~10 mins.
Is your's the same?
S