Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: tink11 on 07 January 2009, 12:49:43
		
			
			- 
				I have a 3.0 litre v6 omega elite automatic, the handbrake cable has snapped. I know that it is ok without a cable as its an auto but does anyone know if its easy to fit  a new one.
			
- 
				Easy enough.   An aftermarket cable should cost you about 20 quid (very expensive from Vx).
			
- 
				Thanks for your help
			
- 
				OE CABLE £31.96 + VAT ON TRADE CLUB
 
 ANDY
- 
				Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
 
 I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
- 
				Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
 
 I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
 
 So's a side light/atil light etc,  but it's still drive & stopable!  :y  :y  :y  ;)
 
- 
				Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
 
 I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
 
 So's a side light/atil light etc,  but it's still drive & stopable!  :y  :y  :y  ;)
 
 You'll still get pulled for it though ;) (not that you will for a handbrake, unless you make a idiot of yourself on a steep hill, trying to do a hill start)
 
- 
				 .....
 unless you make a thingy of yourself on a steep hill, trying to do a hill start)
 
 
 As said many times before .... that's why you have two feet! Is it possible to opps up a hill start in an auto?   ::)  ::)  :y
- 
				Buy a pattern part, the Vx price is stupidly expensive (thier parts having being going up to the point of not being competitive just recently!).
 
 
 e.g.:
 
 http://shop.ebay.co.uk/items/?_nkw=omega+cable+hand+brake&_sacat=0&_fromfsb=&_trksid=m270.l1313&_odkw=omega+cable&_osacat=0