Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: steverubberduck on 10 January 2009, 19:56:13
-
Just wondering, as i have got to do a service on my car..
I have seen a set of cleaned injectors on ebay.
My question is, how hard is it to replace the injectors on a mv6?
-
Personally just used some injector cleaner in the fuel. Poor it in the fuel tank and fill up, if you use it every time you fill the car up your injectors will be kept clean.
HTH
Paul :y
-
i didn't know if was worth changing them whilst i give the engine a good once over
-
Just wondering, as i have got to do a service on my car..
I have seen a set of cleaned injectors on ebay.
My question is, how hard is it to replace the injectors on a mv6?
dont trust injectors of unknown state unless brand new..Yours may be better..
its not very hard to take the injectors out..They are under the plenum..
Only block the cylinder inlets with some cloth..
Best approach is cleaning them with some sound vibration apparatus..
And they measure their flow rates also..
-
sound advice...
the ones i was looking at are through these....
http://www.injectortune.co.uk/
They have just gas flowed my throttle body, and done a really good job