Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: JamesV6CDX on 10 November 2007, 20:44:52
-
Just wondering if there's anything else I need for my conversion.
I have:
Tank and valve (mounted)
Tank Vent kit
Filler
Front end kit
Clips for fuel pipe
6mm and 8mm copper pipe
Olives and compression joints
Coolant T's
Software and Com port lead
Assorted clips etc
Here is the kit I bought, (same as JayW's)
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330186527772&ssPageName=ADME:B:EOIBSA:GB:1123
Is there anything else I may need?
-
Gas?
-
Patience.
-
Gas?
When I removed from the donor vehicle, the tank was full :o ;D
-
Gas?
When I removed from the donor vehicle, the tank was full :o ;D
:o :o
-
Even funnier, as I was removing the pipes we lost a substantial amount of gas (more than anticipated) because the shut off valve needed tightening more.
No joke, next door neighbour came out to have a nosey, and stuck his head in my boot with a fag in his mouth !!
Once he realised gas was spewing everywhere he soon jumped back !
-
Even funnier, as I was removing the pipes we lost a substantial amount of gas (more than anticipated) because the shut off valve needed tightening more.
No joke, next door neighbour came out to have a nosey, and stuck his head in my boot with a fag in his mouth !!
Once he realised gas was spewing everywhere he soon jumped back !
Curious neighbor..People are same everywhere :)
-
James .. can you do me a favour and keep a track of costs and time to fit ?? I'm really very interested in what you are doing .. but have no idea/skill in how to do it !! :(
-
James .. can you do me a favour and keep a track of costs and time to fit ?? I'm really very interested in what you are doing .. but have no idea/skill in how to do it !! :(
If it goes well for me, I intend to help others....
-
Coolant pipe, vapour hose, antifreeze
-
Coolant pipe, vapour hose, antifreeze
Vapour hose - from the varporisor to the injectors, and injectors to nozzles? I have this with the kit.
Coolant hoses etc... I plan to cobble something using my breaker Omega :y
-
Hitch mount BBQ. :y
-
Coolant pipe, vapour hose, antifreeze
Vapour hose - from the varporisor to the injectors, and injectors to nozzles? I have this with the kit.
Coolant hoses etc... I plan to cobble something using my breaker Omega :y
Buy the hose - Omega pipes are too short - but you could try the one on top of the radiator
-
Coolant pipe, vapour hose, antifreeze
Vapour hose - from the varporisor to the injectors, and injectors to nozzles? I have this with the kit.
Coolant hoses etc... I plan to cobble something using my breaker Omega :y
Buy the hose - Omega pipes are too short - but you could try the one on top of the radiator
Now you mention it, probably best to buy a new length, it won't cost a lot, and I've remember a man who can supply this...
-
the kit comes with a long length of heater hose for breaking into the cars system
M8 nuts, bolts and spring washers, threadlock, jublee clips, a cone shaped drill bit (if you are thinking of putting the ECU in the car)
-
the kit comes with a long length of heater hose for breaking into the cars system
M8 nuts, bolts and spring washers, threadlock, jublee clips, a cone shaped drill bit (if you are thinking of putting the ECU in the car)
If I can safely get the loom into the cabin, the ECU definately wants to go in the car!
-
the kit comes with a long length of heater hose for breaking into the cars system
M8 nuts, bolts and spring washers, threadlock, jublee clips, a cone shaped drill bit (if you are thinking of putting the ECU in the car)
If I can safely get the loom into the cabin, the ECU definately wants to go in the car!
if you can find a home for it then do it