Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: humbucker on 24 January 2009, 12:53:11

Title: omega elite / mv6 alloy wheel width
Post by: humbucker on 24 January 2009, 12:53:11

anyone know what a facelift mv6 / elite alloy wheel width is?

Title: Re: omega elite / mv6 alloy wheel width
Post by: markey mark on 24 January 2009, 13:00:24

7.5" iirc  :y

Title: Re: omega elite / mv6 alloy wheel width
Post by: humbucker on 24 January 2009, 13:02:01

was thinking of fitting a set of facelift elite wheels on a 5stud cavalier mk3. off the top of your head do you know if theyd fit without problems? is there an offset issue?

Title: Re: omega elite / mv6 alloy wheel width
Post by: markey mark on 24 January 2009, 13:04:37

i have seen them on a vectra gsi and they looked ace so possibly bud ! :y

Title: Re: omega elite / mv6 alloy wheel width
Post by: humbucker on 24 January 2009, 15:12:03

anyone know omega ET offset on wheels? might give me a better idea then

Title: Re: omega elite / mv6 alloy wheel width
Post by: Beconboy on 24 January 2009, 15:27:08

5+110  et40 i beleive  :y

Title: Re: omega elite / mv6 alloy wheel width
Post by: humbucker on 24 January 2009, 15:30:18

Calibra V6 & 4x4, Carlton, Cavalier V6 & 4x4, Omega, Vectra V6, Senator, Zafira 5 x 110 35...42 65.0

found this repeated online a lot of places, does this suggest cav v6 and omega are the same and wheels are interchangeable?

Title: Re: omega elite / mv6 alloy wheel width
Post by: markey mark on 24 January 2009, 16:29:11

only way to be sure is try them fella et38 omega offset :y

Title: Re: omega elite / mv6 alloy wheel width
Post by: humbucker on 24 January 2009, 17:20:36

hmmn. been out and checked all my wheels. omega 16" ET 39, original cdx 15" alloys 49, the 17" alloys on there at the moment 35!!  this is a little baffling to someone who knows nothing about wheels sizes and offsets. does this mean omega 17s at 33 et will sit ok on this or stick too far out?