Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: dpanic88 on 24 January 2009, 17:37:06

Title: retro fit headlight washers to facelift possible?
Post by: dpanic88 on 24 January 2009, 17:37:06

hi,

if I source the parts, could i install the system to 2.2dti cd.  Would there be the loom connections - or to much hasstle

system parts ?

headlight washer motor
fuse box relay
water bottle - with extra feeds
head light washer jets
water feed cables

regards ;)

Title: Re: retro fit headlight washers to facelift possible?
Post by: feeutfo on 24 January 2009, 20:59:18

worth a search mate, there was a guy doing just that a couple of weeks ago....iirc  :-/

Title: Re: retro fit headlight washers to facelift possible?
Post by: dpanic88 on 25 January 2009, 06:11:58

hi many thanks for the reply

Title: Re: retro fit headlight washers to facelift possible?
Post by: markey mark on 25 January 2009, 07:51:51

would need complete washer bottle all pipework relay and jets plug and play matey main prob would be cutting holes out of bumper ! :-/

Title: Re: retro fit headlight washers to facelift possible?
Post by: Bumbazor on 25 January 2009, 11:15:07

...whereas I've just fitted a facelift bumper to my pre-facelift car and it has the holes in it for the jets. I'll be looking at a similar retro fit soon...

Might just split off the existing washer pipe and route to the jets. Got to be easier than the 'proper' way.

Title: Re: retro fit headlight washers to facelift possible?
Post by: dpanic88 on 25 January 2009, 12:54:24

RE: prob would be cutting holes out of bumper '

only option - unless changing the complete bumber would be to drill - and hope the line up is correct.

many thanks for the reply's

checking on price of parts, if not too bad.. will be the next upgrade to the car.

thanks :) again