Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Big Rod on 29 January 2009, 14:56:08
-
Hi guys,
Long time no speak!
Wondered if you could help. SWMBO's 2.5 V6 won't start. it turns over but nothing happens.
Have checked cambelt and bridged the FPR as I couldn't hear the pump from the ignition alone and the plugs seem to be dry. Also, form what I can tell, I don't think there's a spark.
Any ideas?
TIA,
Rod.
-
check codes bet a 19 comes up crank sensor :y
-
check codes bet a 19 comes up crank sensor :y
Y'alreet chief!! :y
Kind'a thought that myself Mark, in fact it was the first thing I thought on before being sent on wild goose chase.
Is there any documentation on here about how to read the codes and what they mean?
Thanks again!
-
Have a look at the guide mate :y
http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
-
Rod .. post unreadable due to the massive size of your avatar :(
Site rules are 110 x 110 .. yours is 640 x 480 !!!!! :-? :-? :-?
-
Rod .. post unreadable due to the massive size of your avatar :(
Site rules are 110 x 110 .. yours is 640 x 480 !!!!! :-? :-? :-?
It was fine the last time I logged on.
Granted that was some months ago.
I shall remove it.
Please accept my humblest apologies. ;)
-
Rod .. post unreadable due to the massive size of your avatar :(
Site rules are 110 x 110 .. yours is 640 x 480 !!!!! :-? :-? :-?
Watch yourself Rod the avatar coppers about ;D
-
check codes bet a 19 comes up crank sensor :y
Y'alreet chief!! :y
Kind'a thought that myself Mark, in fact it was the first thing I thought on before being sent on wild goose chase.
Is there any documentation on here about how to read the codes and what they mean?
Thanks again!
have you done that paperclip test yet fella ! :D :D
-
have you done that paperclip test yet fella ! :D :D
Just done it, 19 right enough! ::)
Is it an awkward job to replace? Never done one.
-
nice and easy, ignore original route, come up from sensor, up near abs unit, back over to plenum.