Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tunes on 07 February 2009, 15:29:20

Title: help with a fault code please
Post by: tunes on 07 February 2009, 15:29:20

car is a 99 s reg 2.0 16v

have done the paper clip test and i get the eml flashing 10 times then once then another 10 twice

so im thinking fault is 0100??

any ideas people?

Title: Re: help with a fault code please
Post by: GastronomicKleptomaniac on 07 February 2009, 15:41:48

I'm probably wrong, but I think it's "P0100      Mass Air Flow Sensor Voltage High ". HTH.

Title: Re: help with a fault code please
Post by: tunes on 07 February 2009, 15:43:02

meaning? lol :o

Title: Re: help with a fault code please
Post by: tunes on 07 February 2009, 16:34:50

i found a site that says its my maf sensor?

Title: Re: help with a fault code please
Post by: RobG on 07 February 2009, 21:39:55

A code P0100 may mean that one or more of the following has happened:

The MAF may be disconnected, or a wiring connection may be bad
The MAF sensor may be faulty
Verify that the Mass Air Flow Sensor wiring is connected properly and that there are no broken / frayed wires.  :y

Title: Re: help with a fault code please
Post by: tunes on 09 February 2009, 21:24:32

i found out that it means maf sensor voltage to high

so what that means i dnt know

would this explain my breakdown in power?

Title: Re: help with a fault code please
Post by: tunes on 10 February 2009, 03:03:52

anyone????????????