Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: Big Fra on 13 November 2007, 18:19:13

Title: Working multirams.
Post by: Big Fra on 13 November 2007, 18:19:13
As per the meeting and technical tomfoolery and advisory on sunday.

Broocie and Markie noticed a vacuum pipe for the multiram was loose, well today, one small piece of piping later and ........

WA-HEY!

They work!

Cheers guys, the car is now a lot livlier through the gears.

Plus I have a fuel filter just ready to be stuck in.

More meetings like this! ;D :y

I will bring some thank you pressies next time.

Title: Re: Working multirams.
Post by: Markie on 13 November 2007, 18:26:26
 :y :y now you can see just how it should perform  :)
Title: Re: Working multirams.
Post by: JamesV6CDX on 13 November 2007, 18:27:19
Wish mine would work  >:(   :y
Title: Re: Working multirams.
Post by: hotel21 on 13 November 2007, 18:31:38
Goes to show what this place is all about - knowledge transference!!

Your local garage, even if they knew what they were looking for, would have taken at least one hours worth of time, if not two, and charged you an additional fiver for a few squirts of carb cleaner.....

 :y
Title: Re: Working multirams.
Post by: Markie on 13 November 2007, 18:35:16
Quote
Goes to show what this place is all about - knowledge transference!!

Your local garage, even if they knew what they were looking for, would have taken at least one hours worth of time, if not two, and charged you an additional fiver for a few squirts of carb cleaner.....

 :y


You did give out the billing address out on site for payment didnt you Broocie  :y ;)
Title: Re: Working multirams.
Post by: STMO123 on 13 November 2007, 18:54:42
Quote
Wish mine would work  >:(   :y


I thought we decided facelift was different to earlier ones and the rear one only moves under load???
Title: Re: Working multirams.
Post by: CaptainZok on 13 November 2007, 18:58:05
Can't say I've noticed mine moving when blipped, but I know it's working.
MDTM checked it for me at Newent and I ain't arguing with him.
Title: Re: Working multirams.
Post by: Big Fra on 13 November 2007, 19:12:09
Quote
:y :y now you can see just how it should perform  :)

Yeah, but is the amount of fun I'm having measured by how quickly the fuel guage goes down?

Title: Re: Working multirams.
Post by: Jimbob on 14 November 2007, 09:31:43
These meets are great for comparisons and checking things out.

We don't half work Mark hard though  :-[

My car is a totally different beast since he worked his magic on it  :y
Title: Re: Working multirams.
Post by: JamesV6CDX on 14 November 2007, 09:35:31
Quote
Quote
Wish mine would work  >:(   :y


I thought we decided facelift was different to earlier ones and the rear one only moves under load???

We'll know for sure soon - when we monitor the live data with tech2 and drive it :y
Title: Re: Working multirams.
Post by: Phil on 14 November 2007, 10:20:02
Quote
Quote
Quote
Wish mine would work  >:(   :y


I thought we decided facelift was different to earlier ones and the rear one only moves under load???

We'll know for sure soon - when we monitor the live data with tech2 and drive it :y

Well on BOTH mine, mini-facelift 3ltr and facelift 2.5, the REAR multi ram moves when the throttle is blipped, and the FRONT one opens under load.

It only takes a small blip to get the rear to open.

I'll try and get a vid later and stick it up