Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Dusty on 16 February 2009, 12:20:47

Title: Alarm Problem
Post by: Dusty on 16 February 2009, 12:20:47

Can somebody help me with an alarm problem on my 2.6 Omega CD

Whilst driving along the other day we could hear an alarm, although it was not the sound of the horn and the hazard flashers were not coming on.

It did it again this morning whilst it was parked outside. I opened the door the alarm kept going. I started the engine and the alarm still kept going.

I am at a loss to know what this is, as the sound it makes is not connected to the horn of the car, but it does come from within the bonnet.

Any one help please chaps?

Thanks

Dusty :-* :-* :-*

Title: Re: Alarm Problem
Post by: Welung666 on 16 February 2009, 12:24:36

Sounds like the batteries in the power sounder are dying :(

Just unplug it :y

Title: Re: Alarm Problem
Post by: Dusty on 16 February 2009, 12:36:37

Quote

Sounds like the batteries in the power sounder are dying :(

Just unplug it :y

Thanks for that.

What is a power sounder and how do I unplug it?

Dusty :-* :-* :-*

Title: Re: Alarm Problem
Post by: Welung666 on 16 February 2009, 12:43:12

Have a look at this (http://www.omegaowners.com/forum/YaBB.pl?num=1220198611), hope it's a help :)

Title: Re: Alarm Problem
Post by: TheBoy on 16 February 2009, 12:46:27

confirmed, that will be power sounder

Title: Re: Alarm Problem
Post by: Dusty on 16 February 2009, 13:50:26

Thank you all for your help

I think I can disconnect it either by myself or get Mr Dusty to do it

One last thing if the power sounder is disconnected does that mean that the alarm won't work. Not that I am bothered

Thanks Dusty :-* :-* :-*

Title: Re: Alarm Problem
Post by: omegod on 16 February 2009, 13:53:48

The alarm should be ok but you may need to test it itself as my alarm horn was duff i.e the hazards just flash when you set the alarm off.

They are next to each other so easier to replace it while your are in there.

Title: Re: Alarm Problem
Post by: SteveMJ on 19 February 2009, 19:53:02

Dusty

PM sent