Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: SP_3.2 on 19 February 2009, 20:58:09
-
Thinking of have one fitted just to see if anyone knows if i will have to get an ISO connector or will the one in the car fit this system.
Thanks
Steve
-
Hey Steve. How's it going matey? Will we be seeing you at the next Mids/ABS meet?
Pete
-
Thinking of have one fitted just to see if anyone knows if i will have to get an ISO connector or will the one in the car fit this system.
Thanks
Steve
Got a CK3000 fitted in mine, just needed an adapter to connect the Parrot into the prewired phone plug behind the glove box.
Only problem I had was the car was fitted with a part wired Trafficmaster loom which wasn't passing the phone signals to the HU.
Just cured it today with a new piece of loom spliced into the car wiring.
It's not such a big job that you can't fit it yourself Steve.
-
Thats good does not sound too bad of a job with that :y
HI Pete hope you are well, will be at the next meet all going well just been a bit busy. :y
-
Check you've got the phone connector behind the glovebox then you will need an Autoleads SOT-109 I think it is to connect the Parrot into it.
-
Cool will have a check, thanks for that , Do i just need to check at the back of the glovbox at the top of the footwell.
-
Unfortunately it usually hides up behind the glovebox so you have to take that out which is a bit of a pig just to check.