Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Seth on 14 February 2009, 22:55:04

Title: 2.5TD Intercooler removal
Post by: Seth on 14 February 2009, 22:55:04
How do I remove the intercooler on my tractor?
Thanks in anticipation guys!
Title: Re: 2.5TD Intercooler removal
Post by: markey mark on 15 February 2009, 01:16:31
remove arch liner and cheisel jubilee clips off cause they will be rusted solid ! iirc theres two or three 13mm nuts hold it to chassis leg  :y
Title: Re: 2.5TD Intercooler removal
Post by: TheBoy on 15 February 2009, 12:14:25
Jubliee clips off (never seen them rust that bad on tractor - normally too much tractor blood floating around ;)) and 2 bolts on opposite corners of it.  If you have intercooler fan, you need to disconnect that as well.

First time, you may find it easier to take bumper off (dead easy).

To get to top hose to undo jubilee, may want to pop the airbox out.


If you want to write a guide when you do it, I'm sure people will find it useful :y
Title: Re: 2.5TD Intercooler removal
Post by: Seth on 15 February 2009, 22:21:42
Quote
Jubliee clips off (never seen them rust that bad on tractor - normally too much tractor blood floating around ;)) and 2 bolts on opposite corners of it.  If you have intercooler fan, you need to disconnect that as well.

First time, you may find it easier to take bumper off (dead easy).

To get to top hose to undo jubilee, may want to pop the airbox out.

Hmmm - writing a guide eh?
I'll need to get Mrs Sethsmate's digital camera skills involved on this one. When I get a chance, I'll give it a go Jamie.


If you want to write a guide when you do it, I'm sure people will find it useful :y
Title: Re: 2.5TD Intercooler removal
Post by: Seth on 15 February 2009, 22:25:03
Quote
Jubliee clips off (never seen them rust that bad on tractor - normally too much tractor blood floating around ;)) and 2 bolts on opposite corners of it.  If you have intercooler fan, you need to disconnect that as well.

First time, you may find it easier to take bumper off (dead easy).

To get to top hose to undo jubilee, may want to pop the airbox out.


If you want to write a guide when you do it, I'm sure people will find it useful :y

Hmmm - writing a guide eh?
I'll need to use Mrs Sethsmate's digital camera skills on this one.
When I get a chance, I'll give it a go Jamie.
Title: Re: 2.5TD Intercooler removal
Post by: TheBoy on 16 February 2009, 09:06:29
Ta :y
Title: Re: 2.5TD Intercooler removal
Post by: gazsomega on 21 February 2009, 09:16:19
when i upgraded my tractor to put headlight whashers in the bumber came off and you can get to it very easly and the bumper isnt that hard to get off there is a guide on here someware