Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Loch View on 23 February 2009, 10:05:43

Title: timing marks 2.0
Post by: Loch View on 23 February 2009, 10:05:43
Just to check....
the left wheel the intake mark up and the right wheel the exhaust mark up? :-/
Title: Re: timing marks 2.0
Post by: Clouseau on 23 February 2009, 10:14:11
(http://i79.photobucket.com/albums/j123/rjlangton/Wheels.jpg)
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 10:30:27
this is what mine looks like

(http://i297.photobucket.com/albums/mm233/lochlomondclassics/Picture026.jpg)
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 10:30:56
cheap camera  >:(
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 10:39:17
this one is better  :)

(http://i297.photobucket.com/albums/mm233/lochlomondclassics/Picture027.jpg)
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 11:14:20
first problem turned up....the bolts from the crank flywheel will not move at all  >:(
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 11:34:32
they were already half rounded off and even a fair bit of heat won't help

Any ideas?
Title: Re: timing marks 2.0
Post by: Marks DTM Calib on 23 February 2009, 11:48:00
This is the 4 small bolts?

A few options

1) Bang a small socket on them and then try removal.

2) Grind the heads off
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 11:51:03
I thought about grinding the heads off but then there is the problem of removing the ends
Title: Re: timing marks 2.0
Post by: Loch View on 23 February 2009, 14:11:04
One succesful cam belt change  :y