Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: golden_delicious on 11 March 2009, 10:50:36

Title: Clock panel removal
Post by: golden_delicious on 11 March 2009, 10:50:36

Hi everyone,i'm just trying to remove the clocks fron hubbies tractor (02 2.2dti estate 400000 miles)to replace the lights.Followed the great how to instuctions to a point but having got everything loose they don't seem to want to pop out do I need to disconect anything else or as usual am I been too gentle :-) thanks GD

Title: Re: Clock panel removal
Post by: Marks DTM Calib on 11 March 2009, 10:54:54

Have you disconnected the wiring to the rear of the info display?

Does it have the colour display (which is harder to remove)

Title: Re: Clock panel removal
Post by: golden_delicious on 11 March 2009, 11:07:04

The connector is yellow does this just pull off? I'm sure the display was mono it hasn't worked for a while might have a look at that while i'm in there.

Title: Re: Clock panel removal
Post by: golden_delicious on 11 March 2009, 11:32:04

still struggling with the info display connector does it pull straight off?

Title: Re: Clock panel removal
Post by: Marks DTM Calib on 11 March 2009, 11:34:24

Quote

still struggling with the info display connector does it pull straight off?

There is normaly a tag towards the middle of the connector to relaease (on the loom part).

Either a black one that rotates throguh 90 degrees or a clip that pulls out to release the latch. They are quite stiff

Title: Re: Clock panel removal
Post by: golden_delicious on 11 March 2009, 11:44:23

Sorted thanks for advice !