Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: RobG on 18 March 2009, 20:07:21

Title: Siezed Spark Plug
Post by: RobG on 18 March 2009, 20:07:21

Just done a service (oil,filters,plugs et al) plus brake work (as previous post). Could only change 3 of the 4 plugs (yes I know I should have SIX ;D ). The plug at the bulkhead is in solid. Camcover gaskets were done about 6 months ago and couldn`t shift it then so it`s had a good soak in oil :D. Anything else I can use to try and unsieze it. Was thinking maybe Plusgas :-/ any other suggestions. I`ve tried as much elbow grease as I dare for fear of snapping the damn thing. >:(

Title: Re: Siezed Spark Plug
Post by: HGV mechanic on 18 March 2009, 20:20:32

have you tried with the engine hot, give it a bit of stick and it will go ;)

Title: Re: Siezed Spark Plug
Post by: RobG on 18 March 2009, 20:35:12

Cheers HGV will give it a go tomorrow. :y :y Nothing to lose :y