Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gravygranules on 20 March 2009, 21:12:34

Title: breathers.....
Post by: gravygranules on 20 March 2009, 21:12:34

hello chaps, ..just had the cam seal gaskets and head gasket done on my 2.0l and was wondering if ive cleared ''all' the breathers (dont want gaskets blowing again)..ive done the 2 on the top of the engine-connected to the crankcase and the 'plenum?..i think its called.. (the unit thats attached to the top of the carb which,in fact, had the tiny hole blocked solid-now clear tho..)there is a big hose on the right hand side (rear)of the engine, looking at it from the front, which is connected by 4 bolts --is this a breather?.....many thanks

Title: Re: breathers.....
Post by: RobG on 20 March 2009, 22:10:34

Yep, Three breather hoses on camcover  ;)

Title: Re: breathers.....
Post by: miggcddave on 20 March 2009, 22:22:04

have you had a look at maintenance guide on home page it tells you how you claen brethers on a 2ltr  :y its good info worth a look

Title: Re: breathers.....
Post by: gravygranules on 20 March 2009, 23:40:37

thanks v much