Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: snakey07 on 30 March 2009, 01:03:56

Title: Codes
Post by: snakey07 on 30 March 2009, 01:03:56

Help had the pellum off today for a clean, when put it back together did pedal test and got a load of codes 0301, 0302, 0303, 0300 any idea,s. cheers. :(

Title: Re: Codes
Post by: Welung666 on 30 March 2009, 06:48:20

This would be better being posted in the general help section as there are more techie's visit there than here :y

Title: Re: Codes
Post by: vauxmad on 30 March 2009, 15:15:38

yeah better posting this in the maintenance section

Title: Re: Codes
Post by: Lizzie_Zoom on 30 March 2009, 15:20:04

If you are lucky the admins may move this to the correct section! 8-) 8-)

Title: Re: Codes
Post by: Marks DTM Calib on 30 March 2009, 15:42:45

Quote

Help had the pellum off today for a clean, when put it back together did pedal test and got a load of codes 0301, 0302, 0303, 0300 any idea,s. cheers. :(

0300 - Multiple miss fires
0301 - cylinder 1 miss fire
0302 - cylinder 2 miss fire
0303 - cylinder 3 miss fire

Is it running ok?

Its an odd one because they are spread over 2 banks!

there wasn;t 0304, 0305 and 0306 as well then?

Title: Re: Codes
Post by: MutantCav on 30 March 2009, 16:17:59

Did it work ok before you took the plenum off? If the cars mis firing now and wasnt before there is a good chance the o rings on the underside of the plenum have not seated properly and are letting in air :y