Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: VX1 on 01 April 2009, 08:21:54

Title: xenons
Post by: VX1 on 01 April 2009, 08:21:54

Got myself a pair of xenons for the elite and was wondering on how they connect up to the existing wiring? Is there any chopping involved with the wiring and which ones do I need to chop?

Paul :y

Title: Re: xenons
Post by: unlucky mark mv6 on 01 April 2009, 20:13:14

Did you also get the level sensors aswell,which i believe are about £50 each,and need 2 of them.Wiring will probably be 4 wires if its like the vectra,and also wires to your level sensors.Hope this is some help.

Title: Re: xenons
Post by: MutantCav on 01 April 2009, 20:19:03

Run the yellow wire from the motor and power pack to link into the existing yellow wire and the brown wire for each (earth) from the current brown wire...thats it as far as power :y

Title: Re: xenons
Post by: VX1 on 01 April 2009, 20:54:59

Unfortunately the headlights were found to be damaged inside the unit so I declined from collecting them.

Paul