Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mizanur on 02 April 2009, 17:29:58

Title: Can some one help me with Model/Ref. Number?
Post by: mizanur on 02 April 2009, 17:29:58

elloo,

can some one help to identify my omega speedmaster pre-moon watch. i think i have looked every where on the net to get hold the mode/ref.  for this watch however i have had no joy. on saying that, i have found some thing similar to this with the model/ref. CK 2998 however you may notice that the shape of that second hand is different to mine.

many thanks in advance.

here is the link to my watch:
http://www.neta2b.com/watches/Omega_speedmaster_Angle.jpg

and here is the link for CK2998:
http://www.rochpro.com/watchgallery/albumspeed2998.html

Title: Re: Can some one help me with Model/Ref. Number?
Post by: TheBoy on 02 April 2009, 17:55:16

'Fraid not - we are a car site (Vauxhall/Opel Omega) not a watch site.

My brother is an Omega (watch) authorized centre in deepest Oxfordshire (UK) if you're really stuck...

Title: Re: Can some one help me with Model/Ref. Number?
Post by: Entwood on 02 April 2009, 20:44:57

Methinks this thread is 24 hours late .....  :)

Title: Re: Can some one help me with Model/Ref. Number?
Post by: alexandjen on 02 April 2009, 20:52:51

Quote

Methinks this thread is 24 hours late .....  :)

You read my mind ::)

Title: Re: Can some one help me with Model/Ref. Number?
Post by: Martin_1962 on 02 April 2009, 21:32:08

Quote

elloo,

can some one help to identify my omega speedmaster pre-moon watch. i think i have looked every where on the net to get hold the mode/ref.  for this watch however i have had no joy. on saying that, i have found some thing similar to this with the model/ref. CK 2998 however you may notice that the shape of that second hand is different to mine.

many thanks in advance.

here is the link to my watch:
http://www.neta2b.com/watches/Omega_speedmaster_Angle.jpg

and here is the link for CK2998:
http://www.rochpro.com/watchgallery/albumspeed2998.html

Speedmaster I assume then that it is a big V6 and pre moon, I suppose that could be pre facelift.

Sounds like it is a MiniFacelift MV6, try cleaning the breathers and changing the cam cover seals, also when was the cam belt last changed?

Also do a paper clip test and make sure you are not getting 19s, if you are you need a crank sensor

Title: Re: Can some one help me with Model/Ref. Number?
Post by: Martin_1962 on 02 April 2009, 21:33:40

Day late so of course I am going to rip the piss ;D ;D

Can we invade a watch forum enmasse next 1st April?

Mind you I have a good one to play on TBs brother?

Title: Re: Can some one help me with Model/Ref. Number?
Post by: TheBoy on 02 April 2009, 21:37:48

Quote

Day late so of course I am going to rip the piss ;D ;D

Can we invade a watch forum enmasse next 1st April?

Mind you I have a good one to play on TBs brother?

He's wise to wise guys ;D

Saying that, I've seen him manhandle a customer from one of his shops, with a "Don't come back" comment :o

Title: Re: Can some one help me with Model/Ref. Number?
Post by: Martin_1962 on 02 April 2009, 22:41:11

Quote

Quote

Day late so of course I am going to rip the piss ;D ;D

Can we invade a watch forum enmasse next 1st April?

Mind you I have a good one to play on TBs brother?

He's wise to wise guys ;D

Saying that, I've seen him manhandle a customer from one of his shops, with a "Don't come back" comment :o

Could have phoned up asking about real Omegas ;D

Title: Re: Can some one help me with Model/Ref. Number?
Post by: dbug on 02 April 2009, 22:43:43

Its a 105312 mate :y

Title: Re: Can some one help me with Model/Ref. Number?
Post by: tunnie on 02 April 2009, 22:44:33

 ;D ;D ;D ;D ;D ;D ;D