Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kingplym on 03 April 2009, 14:26:20

Title: how to test alarm?
Post by: kingplym on 03 April 2009, 14:26:20

can some one tell me hoe to activate/ test my alarm? :-/

Title: Re: how to test alarm?
Post by: RobG on 03 April 2009, 14:35:54

Open bonnet and hold alarm switch down (near pas pump). Lock doors, wait 10secs then release bonnet switch. If your powersounder has been disconnected the hazards only will flash :y

Title: Re: how to test alarm?
Post by: Entwood on 03 April 2009, 14:37:27

My method is simple ... wind down drivers window then get out and close the door, then lock using remote. This will arm the system.

Wait 1 minute - then lean in through the window and wave arms about .. if the motion detector is working correctly the alarm will sound.

Use remote to unlock door and cancel the alarm. Relock with remote

Wait 1 minute - lean in through window and manually lift the locking pin and open the door. Alarm should sound. cancel with remote.

The last bits of the alarm system are the bonnet/ battery bits ... do you need to test them as well ???

HTH

Title: Re: how to test alarm?
Post by: kingplym on 03 April 2009, 15:01:12

ok will give it a try

thanx :y :y :y

Title: Re: how to test alarm?
Post by: Sir Tigger KC on 03 April 2009, 15:15:57

There will be Omega owners up and down the country setting their alarms off now!! ;D ;D ;D

Off to test mine now :y ;D ;)

Title: Re: how to test alarm?
Post by: kingplym on 03 April 2009, 22:49:23

tested my alarm!!!

what fun but i think my power sounder has been disconnected as the hazards flashed for a minute bef0re the horn started sounding.

i looked really clever waving me arms inside me car :D :D :D