Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Harison213 on 05 April 2009, 15:31:21

Title: 300nm torque wrench in or around Tunbridge Wells
Post by: Harison213 on 05 April 2009, 15:31:21

Hi.

Has anyone in or around Tunbridge Wells got a 300nm torque wrench I could borrow sometime next week? I'd need it for a front wheel hub change as its noise is going beyond my scariness threshold! It shouldn't take long and I'll provide beers for as long as I'm keeping it  ;)

Cheers

Title: Re: 300nm torque wrench in or around Tunbridge Wells
Post by: Jimbob on 05 April 2009, 19:04:53

As tight as you can manage with a breaker bar is fine for wheel bearings iirc

Title: Re: 300nm torque wrench in or around Tunbridge Wells
Post by: Andy B on 05 April 2009, 19:40:09

Quote

As tight as you can manage with a breaker bar is fine for wheel bearings iirc

Tighten till you fart ...... then another 1/4 turn? ::) ;D ;D ;D

Title: Re: 300nm torque wrench in or around Tunbridge Wells
Post by: Harison213 on 05 April 2009, 21:12:17

Quote

Quote

As tight as you can manage with a breaker bar is fine for wheel bearings iirc

Tighten till you fart ...... then another 1/4 turn? ::) ;D ;D ;D

Thanks Jimbob and Andy. I'll give that a go, I'm good at it i.e. farting  :D ;D ;D ;D