Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: beefy on 17 April 2009, 11:22:01

Title: fault code
Post by: beefy on 17 April 2009, 11:22:01

hi guy's please help i have a fault code P0705706 i understand that the P0705 stands for transmission range snsor,  but not to sure what the 706 stands for please help, cheers beefy

Title: Re: fault code
Post by: Welung666 on 17 April 2009, 11:25:59

P0705 = Invalid Signal from TCM (Transmission Control Module)
P0706 = Transmission Range Sensor Circuit Range/Performance

HTH :y

Title: Re: fault code
Post by: beefy on 17 April 2009, 11:31:40

cheers Welung666 you may call me thick, the code is P0705706 dose that mean both of these faults, or just one of them cheers, mate beefy

Title: Re: fault code
Post by: Welung666 on 17 April 2009, 11:35:51

I'm guessing you missed a 10 flash somewhere along the way, if they are both showing then they're both a fault but most likely connected. Fix 1 and the other will go.

Title: Re: fault code
Post by: beefy on 17 April 2009, 11:51:37

ok cheers buddy