Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Richie London on 21 April 2009, 21:25:10

Title: mass air flow sensor
Post by: Richie London on 21 April 2009, 21:25:10

code is 74, says voltage high,  is that anything to worry about, cant see any previous threads to say its a problem

Title: Re: mass air flow sensor
Post by: Bumbazor on 21 April 2009, 21:47:27

Ive got same problem (also 135 but not as important as 74). Can't find any other posts to help. If I find anything I'll pass it on.

Title: Re: mass air flow sensor
Post by: Richie London on 21 April 2009, 21:54:04

Quote

Ive got same problem (also 135 but not as important as 74). Can't find any other posts to help. If I find anything I'll pass it on.

thanks

Title: Re: mass air flow sensor
Post by: feeutfo on 21 April 2009, 22:04:53

can hear TB now, Maf failure very rare etc.

Often thrown by crank sensor issues?

Check wiring to and from? Personally not sure what the voltage high(or low) means while on the subject...Anyone?
 
Swap for a known good one if all else fails?

But you probably know all this tbh.

Title: Re: mass air flow sensor
Post by: Richie London on 21 April 2009, 22:07:59

i'll check the wiring tomorrow

Title: Re: mass air flow sensor
Post by: MutantCav on 21 April 2009, 22:09:39

Try the plug...does it clip into place like it should??

I swapped the MAF over on mine...the plug clipped into place unlike on the old unit...think the old unit itself is ok but not had a chance to test it yet...

Title: Re: mass air flow sensor
Post by: Richie London on 21 April 2009, 23:03:09

i'll see if i notice tomorrow, cheers