Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: miniator on 24 April 2009, 15:33:48

Title: Rear Camber....
Post by: miniator on 24 April 2009, 15:33:48

Can it be adjusted and by how much?!

40mil lowering is not agreeing with the inside of my rear tyres!

Title: Re: Rear Camber....
Post by: TheBoy on 24 April 2009, 16:28:43

Lowering should not drastically affect camber at rear. Remember Vx lower 30mm for MV6.

Rear camber is not directly adjustable.

Title: Re: Rear Camber....
Post by: miniator on 24 April 2009, 16:40:39

umm, well i looked at my tyres earlier and the inside are on the markers where the outside have about 3mm of thread.

i can visibily see the negative cambering at the rear, do mv6 wear the insides of the tyres too!?

Title: Re: Rear Camber....
Post by: miggy on 24 April 2009, 16:54:22

Quote

umm, well i looked at my tyres earlier and the inside are on the markers where the outside have about 3mm of thread.

i can visibily see the negative cambering at the rear, do mv6 wear the insides of the tyres too!?

Have a read of this, suggest you take the miggy for a full set up if you have any concerns, obviousley this guy is in the UK but i am sure there is someone near you that can do the set up.

http://www.wheels-inmotion.co.uk/contact-wim.php

Title: Re: Rear Camber....
Post by: miniator on 24 April 2009, 16:56:57

o aye, theres plenty of places round NI that do full setups! Fronts are wearing perfectly though and she drives straight and true as well! Have to say, i can throw her into a corner with no fear of the rear stepping unless i dip the clutch  :D :y

Title: Re: Rear Camber....
Post by: sidewaysmv6 on 24 April 2009, 16:58:08

legend,am sure the clutch gets dipped more often than not!! :y

Title: Re: Rear Camber....
Post by: miniator on 24 April 2009, 17:00:04

lmao....i have no idea what you mean my friend  :-? 8-)

Title: Re: Rear Camber....
Post by: sidewaysmv6 on 24 April 2009, 17:00:53

yeah yeah!!! ;D ;D