Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: frankfaz2000 on 25 April 2009, 07:02:19

Title: Rear wheel bearings
Post by: frankfaz2000 on 25 April 2009, 07:02:19

I am changing rear wheel bearings on a 2.5 estate year 2000, As I put the bearing shaft back into the new bearing it is fine on the front/outer bearing but pushes out the rear/inner bearing and damages the seal and bearing.
I have wasted 2 new bearings at this stage and am about to try the third one as I need to get it back on the road.
Any advise would be welcome
Frank

Title: Re: Rear wheel bearings
Post by: sassanach on 25 April 2009, 08:27:56

when i did mine i made a puller using a old wheel brg nut to pull the hub  through the brg.