Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: hoj on 26 April 2009, 00:19:11
-
Changed the glovebox lock/handle today and noticed a few cut wires and more wires going to a connector block but not plugged into anything
anyone know what the wires/connector should go to
Think there was a blue, red, yellow, and a black that were cut and others went into a smallish 18 pin connector
all were going towards the bottom right of the glovebox BEFORE the glovebox went back in
-
Not from my own knowledge but previous posts, it might be the hands free phone stuff which is apparently wired in all Migs but just not used in all.
JACK
-
The car did have a phone before i got it and seeing as some of the wires are actually cut you could be right there Jack
-
At least that is where the redundant connector and wires are usually tucked away, so seems a safe bet that is is the handsfree wiring
-
Yep, will be the phone prewiring.
Often butchered by crappy phone installers rather than buying the correct loom to plug in.