Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: megaomega123 on 12 May 2009, 16:39:18

Title: Camber Adjustment
Post by: megaomega123 on 12 May 2009, 16:39:18

My osf camber is sitting at -2.75 How do I adjust it back to the -1.1 where it should be?
Can you get the offset bolts from vauxhall?  :-?

Title: Re: Camber Adjustment
Post by: Andyb on 12 May 2009, 16:49:52

you have to undo the nuts on the hub to shock and ajust that way with a spirit level
but you will never get it 100% mate

Title: Re: Camber Adjustment
Post by: Seth on 12 May 2009, 17:11:46

Quote

you have to undo the nuts on the hub to shock and ajust that way with a spirit level
but you will never get it 100% mate

Yep, then a trip to you local alignment people is a must for accuracy!

Title: Re: Camber Adjustment
Post by: megaomega123 on 12 May 2009, 17:16:55

How do you adjust after undoing bolts? The bolts go through at right angles to the camber line.

Title: Re: Camber Adjustment
Post by: megaomega123 on 12 May 2009, 17:17:54

Quote

Quote

you have to undo the nuts on the hub to shock and ajust that way with a spirit level
but you will never get it 100% mate

Yep, then a trip to you local alignment people is a must for accuracy!

I have access to laser alignment equipment and camber/castor reader.

Title: Re: Camber Adjustment
Post by: Andyb on 12 May 2009, 17:49:05

when bolts are loose the wheel will move from the top either in or out

Title: Re: Camber Adjustment
Post by: megaomega123 on 12 May 2009, 17:54:02

Thanks for that. I shall have a bash tomorrow or next week.  :y

Title: Re: Camber Adjustment
Post by: Andyb on 12 May 2009, 18:25:23

do it asap or it will chew your tyres  :y