Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: headshot119 on 14 May 2009, 17:38:25

Title: Low Beam FLD vision
Post by: headshot119 on 14 May 2009, 17:38:25

Low Beam FLD vision This keeps coming up on the information screen as a fault, but I cant work out what it means or how to rememdy it.

Cars a Omega 2.2 X reg.

Title: Re: Low Beam FLD vision
Post by: ians on 14 May 2009, 17:45:47

Its probably the link bar (about 3" long jobby) that connects your wishbone to the level sensor unit.  Its probably popped off (due to drying up).   On top off the near side front wishbone - go have a look.
(I think there is also one at the rear - have a look there too).

Title: Re: Low Beam FLD vision
Post by: alexandjen on 14 May 2009, 18:29:30

Quote

Low Beam FLD vision This keeps coming up on the information screen as a fault, but I cant work out what it means or how to rememdy it.

Cars a Omega 2.2 X reg.

Have a look at this thread................

http://www.omegaowners.com/forum/YaBB.pl?num=1237989198/new

Title: Re: Low Beam FLD vision
Post by: megaomega123 on 14 May 2009, 21:16:56

Mine went on the front wishbone and it was easily cable tied. Make sure cable tie is tight enough to hold in socket but not too tight to restrict movement.