Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: alexandjen on 16 May 2009, 18:51:31
-
Cleaned the breathers, throttle body and changed the oil and filter today.
Breathers were fairly clean as it is about a year since I did them last.
Throttle body cleaned up easily with a bit of gunge in the little pin hole.
I noticed that with throttle body removed that the inside of the intake manifold had a film of oil all around it..........is this normal?
-
Normal on the two 4 pots that we had :-/
-
Cleaned the breathers, throttle body and changed the oil and filter today.
Breathers were fairly clean as it is about a year since I did them last.
Throttle body cleaned up easily with a bit of gunge in the little pin hole.
I noticed that with throttle body removed that the inside of the intake manifold had a film of oil all around it..........is this normal?
a film is nothing to worry about,normally from the EGR system, its when pools gathering you need to consider action
-
Cleaned the breathers, throttle body and changed the oil and filter today.
Breathers were fairly clean as it is about a year since I did them last.
Throttle body cleaned up easily with a bit of gunge in the little pin hole.
I noticed that with throttle body removed that the inside of the intake manifold had a film of oil all around it..........is this normal?
a film is nothing to worry about,normally from the EGR system, its when pools gathering you need to consider action
Thanks for that :y
Would this point to EGR needing a clean?
-
Cleaned the breathers, throttle body and changed the oil and filter today.
Breathers were fairly clean as it is about a year since I did them last.
Throttle body cleaned up easily with a bit of gunge in the little pin hole.
I noticed that with throttle body removed that the inside of the intake manifold had a film of oil all around it..........is this normal?
a film is nothing to worry about,normally from the EGR system, its when pools gathering you need to consider action
Thanks for that :y
Would this point to EGR needing a clean?
wouldent hurt but i dout it make much of a difference
-
When I removed the plenum on my V6, I noticed evidence of oil/petrol around the o'rings and down the lower manifold ports.
Is this normal? It's just, I can't remember seeing it on my previous V6.....could be wrong though! :y
-
There was a fair old pool in the bottom of ours, the first time I cleaned TB/jet etc. Bit of rag taped to a long stick was the method of choice as I recall, for removal. Can't see it really going anywhere from there though?
Surely it all comes from the breather system, not the EGR?