Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: MikeDundee on 18 May 2009, 06:31:21

Title: QUICK QUERY PLENUM...........
Post by: MikeDundee on 18 May 2009, 06:31:21

......this will fit my 2.6 part number 9128409.

http://cgi.ebay.co.uk/VAUXHALL-OPEL-OMEGA-VECTRA-V6-PLENUM-CHAMBER-GM-9128409_W0QQitemZ380096163672QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item380096163672&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A50

Title: Re: QUICK QUERY PLENUM...........
Post by: markey mark on 18 May 2009, 07:20:40

yep thats the 2.6/3.2 plenum  :y

Title: Re: QUICK QUERY PLENUM...........
Post by: gstylebaby on 18 May 2009, 15:24:26

Is the plenum on a perface lift the same for the 2.5l and the 3.0l then or are they different ????

Title: Re: QUICK QUERY PLENUM...........
Post by: Andy B on 18 May 2009, 15:35:41

Quote

Is the plenum on a perface lift the same for the 2.5l and the 3.0l then or are they different ????

My 3.0 is extended, but that might just be later cars .....  :-/

Title: Re: QUICK QUERY PLENUM...........
Post by: Dazzler on 18 May 2009, 15:36:13

2.5 is a short plenun, 2.6/3.2 long plenum, not sure on 3.0

Title: Re: QUICK QUERY PLENUM...........
Post by: gstylebaby on 18 May 2009, 15:42:27

Mines a 3.0l and has a sort plenum.

Title: Re: QUICK QUERY PLENUM...........
Post by: Chris_H on 18 May 2009, 15:49:20

Mine's a 3.0 f/l and is long.  So there!

Title: Re: QUICK QUERY PLENUM...........
Post by: tmx on 18 May 2009, 15:51:32

Mines a mini facelift and also has the long snout nosed plenum

is that the same one that a 3.2 has then? anyone know if the 3.2 has a bigger inlet divider than a 3.0?

Title: Re: QUICK QUERY PLENUM...........
Post by: gstylebaby on 18 May 2009, 16:01:11

Quote

Mine's a 3.0 f/l and is long.  So there!

 :P :P  ;D ;D ;D