Omega Owners Forum
		Omega Help Area => Omega General Help => Topic started by: tigers_gonads on 19 May 2009, 09:52:23
		
			
			- 
				had the ram system out to change the alternator ( see post in electrical section )
the plastic box at the bottom of the ram system ............ what does it do ?   :-/
the two pipes the should have gone to it was just conected together  :-/   the nipples on the box had been broken off 
i have replaced it with the spare off my doner car but this is bugging my ................ anybody know what it is for / what use it has ??
its been bugging me since i bought this sack of shit car that it always seemed slower then the saloon  :'(
opinions please 
cheers  steve
			 
			
			- 
				Vacuum tank i suspect you are talking about.
			
 
			
			- 
				not exactly sure of its precise purpose but will affect the multirams and therefore performance.
your 2.5 manual should not be sluggish at all - quick enough in most situations IMO
			 
			
			- 
				vacuum tank .......... thats the bugger  :y
two pipes ............ both going round the back of the engine 
what affect does getting the two mixed up ?
before the two pipes was just conected together  ( bypassing the tank )
i have held open the throttle and the front ram changes at high ish revs so thats seems to work  :y
starting to wonder if the estate was abused before i got it  :-/
estate seems not as quick as the saloon did and the estates done less miles !!
yeh i know im a pain in the arse but this is bugging me  >:(
be interested to know what use the tank has  :y
			 
			
			- 
				The vac tank is required so there is still a vac supply to the multirams when on full throttle
			
 
			
			- 
				cheers mark  :y
if the 2 pipes are the wrong way round, what affect on the ram ? 
im on a bit of a mission with this car now ........... only had the thing 3 months and already spent more on it then it cost to buy it  :'(
			 
			
			- 
				If the wrong way round (and assuming the internal one way valve works) then you will get no multiram actuation at all
			
 
			
			- 
				well i reved it at the throtle and the front ram moved at high revs so it looks like it working ok  :y
now to fit the cruise kit  :y
thanks for the help / advise
steve