Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Jakester on 01 June 2009, 21:27:44
-
The autobox in my '00 MV6 dumped all it's fluid Friday night and died, the leak is coming from the torque convertor so I'm guessing its the oil seal.
After inspection & some fresh fluid to locate the fault its clear that the best solution is to replace the box.
So my question is what box do I need, from reading through some old posts I'm guessing an A35, if that's right how do I tell an A35 is an A35?
Any help would be appreciated
Thanks
-
Ther will be a plate on the side of the gearbox stating which box type you have fitted. Ar35 etc. Is yours a Facelift or prefacelift?
HTH
Paul :y
-
Ther will be a plate on the side of the gearbox stating which box type you have fitted. Ar35 etc. Is yours a Facelift or prefacelift?
HTH
Paul :y
Excuse the ignorance, but I believe it's a pre-face lift
-
Would bet its the AR35 if a true MV6...
-
Would bet its the AR35 if a true MV6...
It's listed as an '00 MV6 on the log book