Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Bumbazor on 09 June 2009, 09:52:40

Title: Replacing cam covers
Post by: Bumbazor on 09 June 2009, 09:52:40

When renewing gaskets etc, is there a specific order in which to torque the bolts on each cover?

Title: Re: Replacing cam covers
Post by: markfree on 09 June 2009, 15:10:24

Spiral pattern working in to out :y

Title: Re: Replacing cam covers
Post by: tigers_gonads on 09 June 2009, 15:14:45

i think so mate  :y
i always go top left - bottom right - bottom left - top right and so on and i've had no problems  :y

just don't over torque them down or you will twist the cover  :-[ :-[

talking from experance on that one  :'( :'(

Title: Re: Replacing cam covers
Post by: Bumbazor on 09 June 2009, 15:26:25

Quote

i think so mate  :y
i always go top left - bottom right - bottom left - top right and so on and i've had no problems  :y

just don't over torque them down or you will twist the cover  :-[ :-[

talking from experance on that one  :'( :'(

I've got a 2-25Nm torque wrench now, already set to 8!

Will be doing them at the weekend.