Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: sport on 10 June 2009, 20:53:00

Title: how to fit cruise control
Post by: sport on 10 June 2009, 20:53:00

 has any one fitted cruise control on the 2.2 petrol 03 and if so how do you do it thanks

Title: Re: how to fit cruise control
Post by: tigers_gonads on 10 June 2009, 20:55:43

think its just a case of fitting the correct stork and then it needs to be activated via a tech 2  :y

Title: Re: how to fit cruise control
Post by: pauldmackay on 10 June 2009, 21:02:41

Yup, pretty straight forward, get yourself a stalk with the cruise control buttons, better normally getting a new stalk, takes 5 minutes to swap it over and arrange a quick chat with Tech2.

Theres a guide for it on here.

It may work without the need of TECH2, its seems to be random if it does work straight away or not.

Title: Re: how to fit cruise control
Post by: sport on 10 June 2009, 21:08:19

Hi where do i find the guide to do this thanks :y

Title: Re: how to fit cruise control
Post by: pauldmackay on 10 June 2009, 21:10:42

maintance guide section link

http://www.omegaowners.com/forum/YaBB.pl?num=1197646817

Title: Re: how to fit cruise control
Post by: duggs on 10 June 2009, 21:17:52

Is it literally as easy as that. Nothing needed under the bonnet ?.  I haven't taken the stork off to take a look BUT the small connector is there as i can see it poking out.

Title: Re: how to fit cruise control
Post by: sport on 10 June 2009, 21:21:30

Thank you try this at the weekend my mate has the computer to do the set up

Title: Re: how to fit cruise control
Post by: pauldmackay on 10 June 2009, 21:32:40

It is easy as that for Drive by wire omegas, so thats the 2.2, 2.6 an 3.2 only.

Title: Re: how to fit cruise control
Post by: oceansoul on 10 June 2009, 21:53:59

may need a clutch switch to be fitted if manual. Like mine, cant find one =[

Title: Re: how to fit cruise control
Post by: duggs on 10 June 2009, 22:17:38

OOOOOOO  What do I need for a 98 2.5CD which, as far as I know, isn't drive by wire.

Title: Re: how to fit cruise control
Post by: Andy B on 10 June 2009, 22:53:45

Quote

OOOOOOO  What do I need for a 98 2.5CD which, as far as I know, isn't drive by wire.

All the gubbins from under the bonnet.  :y

Title: Re: how to fit cruise control
Post by: tigers_gonads on 10 June 2009, 22:57:18

replacement stork
actuator and cable ( short or long plenum ? cables a differant size )
4 pin clutch and possibly a brake switch  :y
on the 2.5 / 3.0 ltr v6, you just put it together and it should work mate  :y

pm one of the breakers on here for price  :y

Title: Re: how to fit cruise control
Post by: duggs on 10 June 2009, 23:21:48

Am off to Germany/Austria in a few weeks..sure would be usefull...thats if the old gal makes it of course.