Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: AndyVXR300 on 10 June 2009, 22:26:48

Title: Engine/box Change Issue
Post by: AndyVXR300 on 10 June 2009, 22:26:48

When i had my Omega converted from 2.5 to 3.0 the person who done this used the Gearbox ECU from the 2.5 hence it still has a AR25 ECU.

I had an issue where i kept getting Gearbox fault coming up so decided to have it checked out and was told it should of have had the proper AR35 ECU fitted at the time of the conversion.

So can anyone clarify this ??

I have 2 AR35 ECU'S sitting around so no issues there just want to know :y

The gearbox fault has not appeared for over a week now by the way.....

Andy

Title: Re: Engine/box Change Issue
Post by: Marks DTM Calib on 11 June 2009, 08:33:26

So you now have a stressed AR25 fitted or an AR35 with unknown history fitted?

The ECU's are the same for both engine types by the way

Title: Re: Engine/box Change Issue
Post by: AndyVXR300 on 11 June 2009, 19:43:27

Quote

So you now have a stressed AR25 fitted or an AR35 with unknown history fitted?

The ECU's are the same for both engine types by the way

Changed the oil in the gearbox (AR35)today and had the ecu updated on tech 2 and it is now 100%.... :y

Title: Re: Engine/box Change Issue
Post by: MutantCav on 11 June 2009, 21:29:51

Was going to say more likely to be fluid mate...