Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: V6Astra F on 15 June 2009, 18:38:41

Title: Will This Ecu Work ?
Post by: V6Astra F on 15 June 2009, 18:38:41

Hi

Ok i got my SAI sorted with the motronic 2.8.1  :y . Now i got this extra ecu but i dont know if it will work with the valves on the intake . Numbers on it are 90 457 098 & 0 261 203 272/273   FS . I had it in the car when i used the C25XE intake , using a Vectra B X25XE intale now . Just want to test it because i cant get those valves to work  :-? , but i need to know if this ecu supports them .

Thank You

Title: Re: Will This Ecu Work ?
Post by: V6Astra F on 19 June 2009, 08:00:09

Ok i found out that its a Motronic 2.8 from a X30XE , thats all i came up with

Title: Re: Will This Ecu Work ?
Post by: TheBoy on 19 June 2009, 09:00:22

Quote

Ok i found out that its a Motronic 2.8 from a X30XE , thats all i came up with

AFAIK, that was only fitted to Omega and Sintra. Seeing as Sintra is pretty rare, its most likely Omega, and thus would have the Omega Multiram config.

Unsure if using a map chip from a Vectra would help, as presumably the valves are part of the map  :-/ - but that is purely a guess.

Title: Re: Will This Ecu Work ?
Post by: V6Astra F on 19 June 2009, 09:23:45

Thanks , im going to give it a try this weekend then  :y