Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mikejaytee on 21 June 2009, 12:40:01

Title: Rear brake pads/ removal.
Post by: mikejaytee on 21 June 2009, 12:40:01

Hi all,

Before I start the job, could someone advise how the rear brake pad pins are removed. Are they a screw fit, and if so, how are they unscrewed.....e.g Allen key, and what size?

Many thanks in advance,

Mike.   :)

Title: Re: Rear brake pads/ removal.
Post by: odin on 21 June 2009, 12:45:00

you just tap them out  from the front use a pin punch  i just used a nail works just as well

Title: Re: Rear brake pads/ removal.
Post by: Darth Loo-knee on 21 June 2009, 12:48:58

Yeap you just knock the peg out with a drift like already suggested :y
If its your first time doing the brakes I would suggest doing one side at a time so if your unsure you have the otherside to giude you.
Know that may sound a little daft but I have seen people undo both sides and then don't know how either go back :-?

Title: Re: Rear brake pads/ removal.
Post by: mikejaytee on 22 June 2009, 07:58:13

Many thanks for the info'. Appreciated..... 8-)


Mike.