Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Elitenut on 29 June 2009, 16:10:09

Title: Romano LPG wiring Diagram
Post by: Elitenut on 29 June 2009, 16:10:09

I changed my oil cooler, so I had to strip the air intake plenum and inlet manifold off, which required the disconnection of gas wiring harnesses. The only problem was there was on 4 connector 2 pairs of 2 being the same and no makings and I'am not shure if they are correctly fitted now.
It runs on petrol but runs bad on gas.
If somebody could supply me some wiring dia. it will put my mind at rest and help me solve the gas running problem.

Thanks in anticipation

Brian

Title: Re: Romano LPG wiring Diagram
Post by: Martin_1962 on 29 June 2009, 22:33:45

Swap one of the pairs over - sounds like 135 gas injectors are being driven by 246 injector pulses and vise versa

Failing that check for a loose connection

Title: Re: Romano LPG wiring Diagram
Post by: Elitenut on 30 June 2009, 12:16:17

I have solved  the problem, stripped the air intake plenum off and and checked harnesses back to the Romano ECU plug, used the logic lowest pin number on the ECU plug being for 1 - 3 - 5 cyl.
It worked and is running o/k

Thanks Martin for your reply.

Regards

Brian