Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: bluehawk on 05 July 2009, 09:04:56

Title: fault code
Post by: bluehawk on 05 July 2009, 09:04:56
have the following fault code and car in limp mode  any idea on solution

P0700   EOBD Error stored by Transmission Control (TC) Modul
Title: Re: fault code
Post by: Chris_H on 05 July 2009, 09:52:51
Well off my range of experience but it sounds as though the auto box (I presume you have one?) has a problem.  I also guess that a pukka Tech2 could read the actual problem from the auto box ecu.

From the Gunson list of codes:
P0700 Transmission Control System (MIL Request).  I know that doesn't add much but the auto box codes may well be Omega (or GM) specific.

Probably need to ask someone on here who has Tech2.
Title: Re: fault code Help ?????????????
Post by: bluehawk on 05 July 2009, 21:49:58
Any More suggestions
Title: Re: fault code
Post by: Jimbob on 06 July 2009, 06:07:24
you will need a good reader to ask the gearbox what is really wrong.

may be down to low fluid, but could be a host of other issues
Title: Re: fault code
Post by: TheBoy on 06 July 2009, 11:01:42
As said, you need a good code reader to ask the gearbox what's wrong - the engine fault code you have is just a code to say the gearbox ecu has asked the engine ecu to reduce power and to notify the driver that something ain't right