Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: tunnie on 06 July 2009, 10:27:02

Title: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 10:27:02
Whats the diameter of the flexi join on the 2.2?

Found some suitable replacements but not sure which size  :-/

http://cgi.ebay.co.uk/Exhaust-Flexi-Pipe-Tube-Stainless-Steel-Joiner-100-x-63_W0QQitemZ260432635455QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3ca2fea63f&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A0|293%3A1|294%3A50

http://cgi.ebay.co.uk/2-Stainless-Steel-Flexi-Exhaust-Tube_W0QQitemZ260325113374QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3c9c95fe1e&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A1|293%3A1|294%3A50

http://cgi.ebay.co.uk/55mm-X-100mm-CLAMP-ON-EXHAUST-FLEXI-PIPE-ILOK_W0QQitemZ350220004369QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item518abd2c11&_trksid=p3286.c0.m14&_trkparms=65%3A12|66%3A2|39%3A1|72%3A1689|240%3A1318|301%3A0|293%3A1|294%3A50
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 11:36:36
51mm diameter, flexi joint is 100mm long :y
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 11:48:25
Quote
51mm diameter, flexi joint is 100mm long :y

Cheers  :y

Where did you get yours from? on eBay i can only a single auction for 51 diameter, but its wayyyy to long  :'(

http://cgi.ebay.co.uk/ILOK-EXHAUST-FLEXI-WELD-ON-DIA-51-X-203-8-LONG_W0QQitemZ320369364242QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4a97808d12&_trksid=p3286.c0.m14&_trkparms=65%3A12%7C66%3A2%7C39%3A6%7C72%3A1683%7C240%3A1318%7C301%3A1%7C293%3A1%7C294%3A25
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 11:50:17
ok found one, says 'Unlined' is that what i need?

http://www.camskill.co.uk/products.php?plid=m15b408s1411p5644&tbv=EXHAUST_FLEXI_SECTIONS_/_UNLINED_-_Unlined_Flexi_Section_51_X_101.6mm_Performance_Exhaust_Systems_&_Exhaust_ProductsMiscellaneous_Exhaust_Parts
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 14:24:25
Quote
ok found one, says 'Unlined' is that what i need?

http://www.camskill.co.uk/products.php?plid=m15b408s1411p5644&tbv=EXHAUST_FLEXI_SECTIONS_/_UNLINED_-_Unlined_Flexi_Section_51_X_101.6mm_Performance_Exhaust_Systems_&_Exhaust_ProductsMiscellaneous_Exhaust_Parts

Thats the puppy ;) :y
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 16:56:40
Quote
Quote
ok found one, says 'Unlined' is that what i need?

http://www.camskill.co.uk/products.php?plid=m15b408s1411p5644&tbv=EXHAUST_FLEXI_SECTIONS_/_UNLINED_-_Unlined_Flexi_Section_51_X_101.6mm_Performance_Exhaust_Systems_&_Exhaust_ProductsMiscellaneous_Exhaust_Parts

Thats the puppy ;) :y

Purchased, and will be delivered tommorow  :)  :y
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 18:32:32
Who's welding it for you Tun?
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 20:28:14
Quote
Who's welding it for you Tun?

Not sure yet, had some very kind offers from a couple of people  :)

I was going to post it up to Loo Knee, but due to the size, weight, and possibility of damage via courier i think its best taken up in person.

I am hoping someone might teach me to weld  ::)
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 20:34:23
Quote
Quote
Who's welding it for you Tun?

Not sure yet, had some very kind offers from a couple of people  :)

I was going to post it up to Loo Knee, but due to the size, weight, and possibility of damage via courier i think its best taken up in person.

I am hoping someone might teach me to weld  ::)

The bl00dy cheek!!! ;D ;D I might be closer and I'll let you have a play with my welder ;) (Daz says that to everyone ;) ;D )
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 20:36:29
Quote
Quote
Quote
Who's welding it for you Tun?

Not sure yet, had some very kind offers from a couple of people  :)

I was going to post it up to Loo Knee, but due to the size, weight, and possibility of damage via courier i think its best taken up in person.

I am hoping someone might teach me to weld  ::)

The bl00dy cheek!!! ;D ;D I might be closer and I'll let you have a play with my welder ;) (Daz says that to everyone ;) ;D )

Its a well known admin that is handy with his tools  :y
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 20:37:26
Quote
Quote
Quote
Quote
Who's welding it for you Tun?

Not sure yet, had some very kind offers from a couple of people  :)

I was going to post it up to Loo Knee, but due to the size, weight, and possibility of damage via courier i think its best taken up in person.

I am hoping someone might teach me to weld  ::)

The bl00dy cheek!!! ;D ;D I might be closer and I'll let you have a play with my welder ;) (Daz says that to everyone ;) ;D )

Its a well known admin that is handy with his tools  :y

 :-X
Title: Re: 2.2 Flexi Diameter
Post by: tunnie on 06 July 2009, 20:40:21
Quote
Quote
Quote
Quote
Quote
Who's welding it for you Tun?

Not sure yet, had some very kind offers from a couple of people  :)

I was going to post it up to Loo Knee, but due to the size, weight, and possibility of damage via courier i think its best taken up in person.

I am hoping someone might teach me to weld  ::)

The bl00dy cheek!!! ;D ;D I might be closer and I'll let you have a play with my welder ;) (Daz says that to everyone ;) ;D )

Its a well known admin that is handy with his tools  :y

 :-X

Who knows, if i can weld, i can go on Scrapheap challenge  ;D
Title: Re: 2.2 Flexi Diameter
Post by: Welung666 on 06 July 2009, 21:47:24
Well you're welcome on my welder anytime matey :y