Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: astroblaster on 06 July 2009, 01:13:56

Title: Correct oil
Post by: astroblaster on 06 July 2009, 01:13:56

Hi im after a bit of help the bloke i bought the car off said the engine oil he's been using is 20-40 mineral is this oil any good or should i be using something different i have a 98 2.5 v6 petrol  :)

Title: Re: Correct oil
Post by: jonathanh on 06 July 2009, 07:30:29

use what VX recommend - they do it for a reason!

10/40 semi synthetic i think

Title: Re: Correct oil
Post by: dbug on 06 July 2009, 08:32:00

Confirm Vx 10\40w semi synth

Title: Re: Correct oil
Post by: KillerWatt on 06 July 2009, 08:46:46

I don't use Vx branded oil myself, but I do use what the others are using.....10/40 Semi Synthetic.

Title: Re: Correct oil
Post by: TheBoy on 06 July 2009, 10:59:15

Whatever you use it must meet or exceed the specs in the handbook.  In reality, this means any Semi Synth 10/40 or better.  Mineral oil will not make this grade.

Personally, I'd also avoid the Castrol oils.

I use the GM semi synth, mainly becuase its a good oil and a fantastic price (if you have access to Trade Club that is)

Title: Re: Correct oil
Post by: Lizzie_Zoom on 06 July 2009, 11:30:54

I also confirm that Vx 10/40 semi-synthetic is the oil you want Vx part no 093165216 for 5ltrs, and in June the offer of 4 x 5 ltrs for the price of three, @ £32.67, ex-vat with TC, was available.

I would add that if the previous owner has used full mineral oil then I would change the oil and filter, after initially filling with semi-synthetic, every 3-4,000 miles. ;) ;)

Title: Re: Correct oil
Post by: shammster on 06 July 2009, 16:52:45

And clean the breathers out!

Title: Re: Correct oil
Post by: astroblaster on 07 July 2009, 01:17:17

Thanks very much will get it sorted out as soon as i can :) :y