Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gsizoli on 14 July 2009, 06:56:42

Title: Code 19
Post by: gsizoli on 14 July 2009, 06:56:42

Hi!

My car didn't start 1 year ago, so I replaced the crank sensor (to a geniue one).The cables were aranged correctly, it was checked. Now I tried the paperclip test and I've got code 19. The car starts fine and runs fine.So why I've got code 19?Is it mean any problem?It sounds strange if it could be crank sensor again....I dont want to repalce in evry year.Is the code needed to erase from ECU, or cancelled automaticallay?
Br
Zoli

Title: Re: Code 19
Post by: Jimbob on 14 July 2009, 07:09:07

the code should auto delete.

I am having a similar issue with a 14 month old sensor, check out my crank sensor longevity thread  :y

Title: Re: Code 19
Post by: gsizoli on 14 July 2009, 07:24:23

OOpss.
My English is not the best what do you mean under the second sentence?

Title: Re: Code 19
Post by: Lazydocker on 14 July 2009, 07:38:58

I had a similar situation where I had a code 19... It appears mine was just a rare situation where it didn't automatically clear itself :o :o :( :(

Title: Re: Code 19
Post by: dbug on 14 July 2009, 08:32:45

Clear the code 19 with code reader/tech2 and then see if it comes back  ;)

Title: Re: Code 19
Post by: Jimbob on 14 July 2009, 09:02:08

Quote

OOpss.
My English is not the best what do you mean under the second sentence?

Sorry, I am havin a similar problem...

http://www.omegaowners.com/forum/YaBB.pl?num=1247427967/all

Title: Re: Code 19
Post by: gsizoli on 14 July 2009, 10:23:08

OK, I will ask somebody to clean it, because I can't believe it if it fails so fast..