Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: feeutfo on 16 August 2009, 08:26:06

Title: rear bush plate torque settings?
Post by: feeutfo on 16 August 2009, 08:26:06

anyone know the correct torque settings for the 3x 15 mill bolts and 1x 18 mill bolt that hold the rear donut bush and triangular plate?

Title: Re: rear bush plate torque settings?
Post by: RobG on 16 August 2009, 16:44:41

IIRC 65 Nm or 48 lb/ft all 4