Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: samrey4u on 17 August 2009, 20:08:25

Title: breather on top of plenum
Post by: samrey4u on 17 August 2009, 20:08:25

how do i remove breather box on top of plenum ? need to remove to clear out breathers also what other breathers do i do and is there a guide on here ? :-/

Title: Re: breather on top of plenum
Post by: tunnie on 17 August 2009, 20:10:04

sure there is a guide for this, but the top of the black Vx strip will just pop off, put a flat head screw driver under neath. The breather section is held down by a torx bolt iic, just pop that off.

Its Best to remove the throttle body as well

Title: Re: breather on top of plenum
Post by: Toby on 17 August 2009, 20:11:23

There is a guide in the Maintainence Guide section.

Basically though. Remove plenum, prise of the black cover (there is actually a cover on top of the breather box itself) Undo the screw. Give em a clean as well as all the pipes. Separate the throttles and clean them too.

Tis all in the guide...very easy to follow too

Title: Re: breather on top of plenum
Post by: samrey4u on 17 August 2009, 20:12:11

Quote

sure there is a guide for this, but the top of the black Vx strip will just pop off, put a flat head screw driver under neath. The breather section is held down by a torx bolt iic, just pop that off.

Its Best to remove the throttle body as well

:y and which others need clearing ?

Title: Re: breather on top of plenum
Post by: Toby on 17 August 2009, 20:15:21

http://www.omegaowners.com/forum/YaBB.pl?num=1152598350

All in there.  :y

Title: Re: breather on top of plenum
Post by: samrey4u on 17 August 2009, 20:39:03

Quote

http://www.omegaowners.com/forum/YaBB.pl?num=1152598350

All in there.  :y

many thanks toby  :y