Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 24 August 2009, 12:18:07
-
A inlet
G exhaust isn't it?
-
other way around
X30XE : 'G' Blue inlets & 'A' Green exhaust
-
other way around
X30XE : 'G' Blue inlets & 'A' Green exhaust
THere were G written on both cams as wel as A4 and G something :-[
-
ignore the stamp on the body of the camshaft. Probably said 'gc' followed by a double figured number? They all say this. You are concerned with the stamp on the neck. Printed dot matrix style, will say 'g' or 'a' followed by a number
-
Printed dot matrix style, will say 'g' or 'a' followed by a number
'G77' no less...
(http://www.v6calibra.net/tuning/images/omega_inlet_cam_lrg.jpg)
:y
-
Fitted correctly - for some reason though I thought inlet was A :-[
Finishing soon for the day as I am worn out.
Just going to do a pulley or two
-
narrow escape there then!
where did you get your oil seals, they're a tenner each from the stealer? i'm right in thinking it's one oil seal per cam aren't i?
-
narrow escape there then!
where did you get your oil seals, they're a tenner each from the stealer? i'm right in thinking it's one oil seal per cam aren't i?
Just reused them.
I had taken them out G inlet A exhaust as well